OKIDATA OL400e Series, Service Manual

Page: 116 / 397

Page: 90
Service Manual for OL400e/OL410e/OL410e-PS
Chapter 3 Maintenance & Disassembly
3.2 DISASSEMBLY/ASSEMBLY PROCEDURES
General Information
This section contains the printer disassembly procedures. Only the removal procedures
are explained here. Reverse the procedure for the installation.
At the bottom of each procedure is a listing of the parts covered in that procedure. The
Okidata part number, item description, comment (RSPL, Option, Consumable) and cross-reference
to Appendix B is provided for each part.
Items included in the Recommended Spare Parts List are
indicated by the acronym RSPL. N/A will appear where a part number is not available.
Part Item Comment Appendix B
Number Description Reference
This Service Handbook lists the disassembly procedures for major components of the unit.
Okidata DOES NOT recommend disassembling a unit which is operating normally. If you
decide to perform disassembly during this training, Okidata recommends that you perform
only the disassembly procedures for RSPL items. All other procedures are provided to assist
you in identifying parts. It is not likely that you will perform these procedures while servicing
the unit.
Be sure to read all notes, cautions, and warnings, as they contain important information
regarding disassembly / assembly.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)