OKIDATA OL400e Series, Service Manual

Page: 241 / 397

PRINT POS
0 mm *
*An asterisk indicates the current setting.
Setting values are in increments of .5 mm
-4 mm, -3.5 mm, -3 mm, -2.5 mm, -2 mm, -1.5 mm, -1 mm, -.5 mm,
0 mm, +.5 mm, +1 mm, +1.5 mm, +2 mm, +2.5 mm, 3 mm, 3.5 mm
- Negative values of the print start positions move the position closer to the
leading edge of the paper.
- Positive values of the print start positions move the position away from the
leading edge of the paper.
- To change any setting, press LAST - / Paper Size or NEXT + / Demo to move through
the settings.
*An asterisk indicates the current setting.
- Press ENTER / Copies to select the desired setting.
*An asterisk indicates the current setting.
- Press ON-LINE to save the setting and exit the engine maintenance mode.
The operator panel displays the following message.
ON-LINE ON-LINE ON-LINE
HPIIP HPIII ADOBE PS
(OL400e) (OL410e) (OL410e/PS)
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)