manualshive.com logo in svg

OKIDATA OL400e Series, Service Manual

Share
Download
OKIDATA OL400e Series Service Manual Download Page 188

Page: 130

Service Manual for OL400e/OL410e/OL410e-PS

Chapter 3 Maintenance & Disassembly

 

3.2.38 Second Paper Feed Unit - Hopping Roller Shaft

- Power OFF the printer.
- Remove the second paper feed unit.
- Remove the paper cassette.
- Open the front cover (1).
- Remove the two screws (2).
- Remove the hopping roller frame (X). 

Be careful not to lose the springs (4).

- Remove the one-way clutch gear (5).
- Remove bush A (6).
- Remove the hopping roller shaft assembly (7). 

Be careful not to lose bush B (8).

PART #

Item Description

Comment

App. B
Reference

P/N N/A 

Frame: Hopping Roller

SPF

B.2.08

P/N N/A

Spring

SPF

B.2.08

P/N 51228901

Gear: Hopping Roller Clutch

RSPL

B.2.08

P/N 51607402

Bearing

Option RSPL SPF

B.2.08

P/N N/A

Screw: Tapping

SPF

B.2.08

P/N 51112601

Shaft: Hopping Roller 
Assembly

RSPL Includes 15 16

B.2.08

Summary of Contents for OL400e Series














































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands