manualshive.com logo in svg

OKIDATA OL400e Series, Service Manual

Share
Download
OKIDATA OL400e Series Service Manual Download Page 271

Page: 176

Service Manual for OL400e/OL410e/OL410e-PS

Chapter 4 Failure & Repair Analysis

 

4.4.05 Audible Noise / Input Jams from Paper Cassette

NOTE:  The information in this section is also covered in TSB 5609 

 / FCO 8127.

Symptoms
The unit "squeaks and groans" when paper is fed into the printer.

Paper jams when being fed from the paper cassette.

Cause
The paper separator frame inside the paper cassette.

"Squeaks" are caused by the paper separator frame rubbing against the paper cassette.

"Groans" are caused by the separation rubber of the paper separator frame. The separation 
rubber is either deformed or does not fit properly.

Solution
Okidata FCO Kit 8127 (P/N 58235501).

This kit includes grease, a spring, a separation rubber, 

TSB 5609

 

, and an installation 

instruction sheet.

The grease lubricates the assembly.

The spring provides more side to side pressure.

The separation rubber is trimmed to a more appropriate size. It is also more securely 
attached to the new paper separator frame.

Remove the paper cassette and follow the instructions in the FCO Kit 8127 

.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for OL400e Series














































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands