OKIDATA OL400e Series, Service Manual

Page: 226 / 397

Page: 146
Service Manual for OL400e/OL410e/OL410e-PS
Chapter 3 Maintenance & Disassembly
Page Count Printing Enable / Disable
General Information
This function will enable or disable printing the total page count when the menu is printed.
The default is DISABLED.
Procedure
To print the total page count when the menu is printed, perform the following procedure.
- Close the stacker cover.
- Install the paper cassette tray.
- Clear all error messages displayed on the operator panel.
- Power OFF the unit.
- Press and hold RECOVER / Reset while powering ON the unit.
- Continue to hold RECOVER / RESET through both panel displays.
The operator panel displays the following message for approximately two seconds.
88888888
88888888
- Continue to hold RECOVER / RESET until the operator panel displays the following message.
SYS MNT
- Press MENU 1 / Menu 2.
The operator panel displays the following message.
PAGE CNT
XX
- Press MENU 1 / Menu 2.
The operator panel displays the following message.
PAGE PRT
DISABLE
An asterisk will follow the word ENABLE or DISABLE to indicate the selected setting.
- Press the LAST - / Paper Size or NEXT + / Demo to toggle between ENABLE and DISABLE.
The operator panel displays one of the following messages.
PAGE PRT PAGE PRT
ENABLE DISABLE
An asterisk will follow the word ENABLE or DISABLE to indicate the selected setting.
- Press ENTER / Copies to select ENABLE or DISABLE.
An asterisk will follow the word ENABLE or DISABLE to indicate the selected setting.