OE Max Controls CSDP Plus, User Manual

Page: 163 / 254

165
When the second digit of SEt-50 is set to 0, the in/output signal status
of Con-12 will be displayed as below.
When the parameter is 1, it will be displayed as below.
SEt-50 (3) Parameter Fixiation
• Setting range: 0 x 0 to 0 x 1
• Factory Default: 0 x 0
• Change while the servo is OFF, and turn off the power and turn it back on
The set values are as follows.
0: Parameter Change Enabled
1: Parameter Change Disabled
SEt-50 (4) Parameter Initialization Type
• Setting range: 0 x 0 to 0 x 1
• Factory Default: 0 x 0
• Change while the servo is OFF, and turn off the power and turn it back on
The set values are as follows.
0: Initialize the user parameter and maintain the system related parameter
1: Initialize all the parameters