OE Max Controls CSDP Plus, User Manual

Page: 126 / 254

128
If a sudden excessive current flows through the
servo drive or the main circuit fails, this alarm will
occur.
Check the power supply and increase acceleration/
deceleration time.
If the over current flows through the servo drive or
the main circuit fails, this alarm will occur.
Check the power supply and increase acceleration/
deceleration time.
If the ambient temperature is 55
°
C or higher, IPM
unit failed, or the power supply is low voltage, this
alarm can occur.
Check the power supply and lower the ambient
temperature.
If the torque feedback continues with the
maximum torque for several seconds, this alarm
can occur.
Check the load condition, power supply and motor
capacity, and increase acceleration /deceleration
time.
If 115% or more torque feedback continues for
several seconds, this alarm can occur.
Check the load condition, power supply and motor
capacity, and increase acceleration /deceleration
time.
If the temperature of heatsink plate of servo drive
is over about 95
±
10
°
C, this alarm will occur.
Check the power supply and lower the ambient
temperature.
If the power cable of the motor is not connected,
this alarm will occur.
Connect the motor power cable to the motor and
the servo drive properly.
If drive capacity is exceeded, this alarm will occur .
Check the load condition of the power supply.
If the servo drive is overloaded, this alarm will
occur.
Check the load condition of the servo drive.