OE Max Controls CSDP Plus, User Manual

Page: 162 / 254

164
SEt-50 (1) Serial Encoder Type
• Setting range: 0 x 0 to 0 x 1
• Factory Default: 0 x 0
• Change while the servo is OFF, and turn off the power and turn it back on
The set values are as follows.
0: Serial Absolute Encoder
1: Serial Incremental Encoder
External battery should be equipped to use serial absolute encoder.
This parameter can be used to use the serial absolute encoder without
external battery.
SEt-50 (2) In/Output Signal Status Display
• Setting range: 0 x 0 to 0 x 1
• Factory Default: 0 x 0
• Change while the servo is OFF, and turn off the power and turn it back on
The set values are as follows.
0: Display by the CSDP+ method
1: Display by the CSDP method
To choose the CSDP display method for previous CSDP users at Con-
12 put 1 for the parameter. To choose the CSDP Plus method, put 0 for
the parameter.