OE Max Controls CSDP Plus, User Manual

Page: 41 / 254

43
For instance, if you want to set up a position regulator loop
proportional gain, follow the command below.
Please press the MODE key until SEt-01
appears. When you see SEt-01, press the
direction keys until you see Set-04, the
parameter for the position regulator loop
proportional gain. Then press the ENTER
key and the position proportional gain
parameter will be displayed. Press the
direction keys to get the value you want
and press the SET key to save it. Press
the ENTER key to escape from the
current level.
No. 1 digit is on the far right and
the No. 6 digit is on the far left.
In the status display mode and parameter selection mode, a decimal
place sometimes has a separate meaning of its own.
ྙ ྚ ྛ ྜ ྜྷ ྞ