OE Max Controls CSDP Plus, User Manual

Page: 101 / 254

103
When the motor needs to stop during operation, if the dynamic brake
stopped the motor, it is called dynamic brake stop. On the contrary, if
the friction of the load stopped the motor by itself, it is called Free Run
stop.
Please set the stop method of dynamic brake on
the first digit of SEt-44.
Please determine whether to maintain the dynamic
brake function after the motor has stopped on the
second digit of SEt-44.
Motor Brake
If a mechanical brake is mounted on the motor, it can be used in the
following cases.
• When the load can move by gravity
• When the load should be kept from falling in case of power OFF or servo
off.
The drive cannot use voltage and current high enough to control the
motor brake directly. Therefore, the motor brake cannot be directly
connected to the drive. It can be controlled indirectly by building an
external circuit through a relay.
Dynamic Brake Stop Method
Set Value Function
0 Stops by dynamic brake.
1 Stops by free run.
Dynamic Brake Function After Stoppage
Set Value Function
0 Maintains the dynamic brake function after the dynamic brake stoppage
1 Releases the dynamic brake function after the dynamic brake stoppage