OE Max Controls CSDP Plus, User Manual

Page: 142 / 254

144
SEt-22 Near Position Range
• Setting range: 0 to 1000 pulse
• User Default: 20
• Changes anytime
If the user sets the timing of the position command proximity at the
servo drive that received the position command from the controller
and the difference between the load position and the position
command is smaller than the preset value, the position proximity
detection signal /NEAR can be displayed.
The determination range to display the /NEAR signal is called near
position range.
ATTENTION
Please select the set value carefully because the S-curve
operation will be automatically run if this parameter is set
higher than 0.