OE Max Controls CSDP Plus, User Manual

Page: 144 / 254

146
SEt-24 Encoder Output Ratio Denominator
• Setting range: 1 to 65535 pulse
• Factory Default: 2500
• Changes while the servo is OFF
SEt-25 Jog Command Speed
• Setting range: 0 to 5000 RPM
• User Default: 500
• Changes anytime
This parameter is the command speed for a jog operation or a pilot
operation.
ATTENTION
The servo drive output pulse cannot output to the outside A
and B phase pulses higher than the number of encoder pulses
per the motor’s revolution. If the motor-mounted encoder
generates 2048 PPR, the pulse from the servo drive to the
outside cannot exceed 2048 pulses per the motor’s
revolution.