Nidec LEROY-SOMER Powerdrive FX, Commissioning Manual

Page: 19 / 176

19
QUICK SETUP MODE
Commissioning manual Powerdrive MD2/FX
4617 en - 2017.09 / e
• Spd MENU: SPEEDS AND RAMPS
Parameter Address Name Adjustment range Factory setting
Spd.01 01.06 Maximum reference clamp 0.00 to 60000.00 rpm 1500.00 rpm
Spd.02 01.07 Minimum reference clamp 0.00 to Spd.01 rpm 0.00 rpm
Spd.03 01.14
Reference selector
Terminal inputs
Analog input 1
Analog input 2
Preset reference
Keypad
Terminal inputs
Spd.04 01.21 Preset ref. 1 +
Spd.01
rpm 0.00 rpm
Spd.05 01.22 Preset ref. 2 +
Spd.01
rpm 0.00 rpm
Spd.06 02.11 Acceleration rate 1 0.1 to 3200.0 s 20.0 s
Spd.07 02.21 Deceleration rate 1 0.1 to 3200.0 s 20.0 s
Spd.08 02.04 Deceleration ramp mode select
Fixed ramp
Automatic ramp
Automatic ramp +
Fixed ramp +
Automatic ramp
If Ctr.02 = Induction motor in vector control mode or PM motor (Servo) in vector control mode:
Spd.09 03.10 Speed loop proportional gain Kp1 0 to 32000 200
Spd.10 03.11 Speed loop integral gain Ki1 0 to 32000 100
• I/O MENU: CUSTOMER INTERFACE
Parameter Address Name Adjustment range Factory setting
I/O.01 07.11 Analog input 2 mode
0-20 mA
20-0 mA
4-20 mA with detection
20-4 mA with detection
4-20 mA without detection
20-4 mA without detection
4-20 mA without
detection
I/O.02 07.15
AI3 signal type
0-20 mA
20-0 mA
4-20 mA with detection
20-4 mA with detection
4-20 mA without detection
20-4 mA without detection
0-10 V
+/-10 V
0-10 V
I/O.03 07.21 AO1 analog output 1 mode
+/-10 V
0-20 mA
4-20 mA
4-20 mA
I/O.04 07.19 AO1 analog output 1 source
Motor speed
Current magnitude
Output power
Active current
Current
magnitude
I/O.05 07.20 AO1 analog output 1 scale 0.000 to 4.000 1.000