Nidec LEROY-SOMER Powerdrive FX, Commissioning Manual

Page: 16 / 176

16
PARAMETER-SETTING SOFTWARE
Commissioning manual Powerdrive MD2/FX
4617 en - 2017.09 / e
2.2.6 - «Stop/Reset» function
This button is accessible on all screens in factory-set configuration
and is used to give a stop command or reset the drive.
It can be disabled if necessary from
«Keypad control setup»
or depending on the values of the 06.12 and 06.43 parameters
(see section 2.2.3.4).
CAUTION:
• The Stop/Reset key is automatically enabled for
keypad control (regardless of the value of parameter
06.12 «Keypad stop key»).
• If the Stop/Reset touch-sensitive button is
deactivated ( 06.12 = Disabled), it does not appear on the
interface pages, unless the drive trips.
2.3 - Communication loss alarm
If communication between the drive and the parameter-setting
interface is broken, the following message appears on the
screen, preventing access to all the interface functions.
To restore the serial link, check the connection between the
drive and the parameter-setting interface, then press the
key to return to the current page.
3 - PARAMETER-SETTING
SOFTWARE
With MDX-SOFT, setting parameters and supervising the
POWERDRIVE
from a PC is very user-friendly. Numerous
functions are available:
- Quick commissioning with the simplified menu
- File saving
- Help file
- Comparison of 2 files or one file with the factory settings
- Supervision (in table or progress bar form)
- Diagnostics
- Representation of parameters in a table
The MDX-SOFT software can be downloaded from the Internet
at the following address:
http://www.leroy-somer.com/fr/telechargements/logiciels/
To connect the PC to the POWERDRIVE, use an «MDX-
USB Isolator» isolated USB kit.
•
In conformity with standard EN 60950, the drive
USB link can only be used via a device that provides
isolation of 4 kV (MDX-USB isolator option).
NB:
If the control board is only supplied by the USB (drive powered
down), the optional board settings are not visible, and are
therefore neither saved nor restored.