Nidec LEROY-SOMER Powerdrive FX, Commissioning Manual

Page: 92 / 176

92
ADVANCED PARAMETER-SETTING MODE
Commissioning manual Powerdrive MD2/FX
4617 en - 2017.09 / e
5.9.2 - Explanation of parameters in menu 8
Note: The sampling period is 2 ms for the digital inputs and
outputs.
08.01 to 08.05 : DI1 to DI5 state
Adjustment range : Disabled (0) or Enabled (1)
Format: 8 bits
These parameters indicate the state of digital inputs DI1 to DI5.
08.06 : DO1 reading
Adjustment range : Disabled (0) or Enabled (1)
Format: 8 bits
08.07 : Output relay 1 state
Adjustment range : Open (0) or Closed (1)
Format: 8 bits
This parameter indicates the state of the output relay.
Open (0):
RL1 open.
Closed (1):
RL1 closed.
08.08 : Output relay 2 state
Adjustment range : Open (0) or Closed (1)
Format: 8 bits
This parameter indicates the state of the output relay.
Open (0):
RL2 open.
Closed (1):
RL2 closed.
08.09 : Safe Torque Off inputs
Adjustment range : 0 to 3
Format: 8 bits
This parameter indicates the state of the «Safe Torque Off»
inputs (at the terminal block), terminals STO1, STO2.
STO2 - STO1: 00 (0):
Drive disabled.
STO2 - STO1: 01 (1):
Tripped.
STO2 - STO1: 10 (2):
Tripped.
STO2 - STO1: 11 (3):
Drive enabled.
08.10 : Not used
08.11 to 08.15 : Digital inputs 1 to 5 invert
Adjustment range : Disabled (0) or Enabled (1)
Factory setting : Disabled (0)
Format: 8 bits
These parameters are used to invert the state of the digital input.
Disabled (0):
Not inverted.
Enabled (1):
Inverted.
08.16 : Digital output 1 invert
Adjustment range : Disabled (0) or Enabled (1)
Factory setting : Disabled (0)
Format: 8 bits
This parameter is used to invert the state of output DO1.
Disabled (0):
Not inverted.
Enabled (1):
Inverted.
08.17 : Output relay 1 invert
Adjustment range : Disabled (0) or Enabled (1)
Factory setting : Disabled (0)
Format: 8 bits
This parameter is used to invert the state of the relay 1 source.
Disabled (0):
Not inverted.
Enabled (1):
Inverted.
08.18 : Output relay 2 invert
Adjustment range : Disabled (0) or Enabled (1)
Factory setting : Disabled (0)
Format: 8 bits
This parameter is used to invert the state of relay 2.
Disabled (0):
Not inverted.
Enabled (1):
Inverted.
08.19 : Not used
08.20 : Digital I/O read word
Adjustment range : 0 to 511
Format: 16 bits
This parameter is used to determine the state of the I/O with a
single read operation.
Each bit of this word represents the state of parameters 08.01
to 08.09.
Bit
8 7 6 5 4 3 2 1 0
State 08.09 08.08 08.07 08.06 08.05 08.04 08.03 08.02 08.01
E.g.
DI1 = 1 = 2
0
= 1
DI3 = 1 = 2
2
= 4
==> 08.20 = 5