manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 85

Getting Started

3-5

4.

Press <ESC> or <Enter> to access the access point CLI.

5.

Enter the default username of “

admin

” and the default password of “

motorola.

”

As this is the first time you are logging into the access point, you are prompted to enter a 
new password and set the county code. Refer to 

Country Codes on page A-9

 for a list of each 

available countries two digit country code.

6.

At the CLI prompt (admin>), type “

summary

.”

The access point’s LAN IP address will display.

7.

Using a Web browser, use the access point’s IP address to access the access point.

8.

Refer to 

Basic Device Configuration on page 3-5

 for instructions on the initial (basic) 

configuration of the access point. 

3.5 Basic Device Configuration

For the basic setup described in this section, the Java-based Web UI will be used to configure the 
access point. Use the access point’s LAN interface for establishing a link with the access point. 
Configure the access point as a DHCP client. For optimal screen resolution, set your screen resolution 
to 1024 x 768 pixels or greater.

1.

Log in using 

admin

 as the default Username and 

motorola 

as the default Password. Use 

your new password if it has been updated from default.

There is no difference in the login method between the AP-5131 and AP-5181 model access 
points. However, each model displays a login screen unique in appearance (with a different 
model name). Additionally, each model access point displays a banner on top of each menu 
screen unique to the AP-5131 or AP-5181 model supported.

NOTE

For optimum compatibility, use Sun Microsystems’ JRE 1.5 or higher 
(available from Sun’s Website), and be sure to disable Microsoft’s Java 
Virtual Machine if installed.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands