Motorola AP-51 Series Product Reference Manual Download Page 566

Page: 566 / 724

AP-51xx Access Point Product Reference Guide

8-208

AP51xx>admin(system.radius.ldap)> set

Description:

Defines the LDAP parameters.

Syntax:

Example:

admin(system.radius.ldap)>

set ipadr 157.235.121.12

admin(system.radius.ldap)>

set port 203.21.37.18

admin(system.radius.ldap)>

set binddn 123

admin(system.radius.ldap)>

set basedn 203.21.37.19

admin(system.radius.ldap)>

set passwd mudskipper

admin(system.radius.ldap)>

set login muddy

admin(system.radius.ldap)>

set pass_attr 123

admin(system.radius.ldap)>

set groupname 0.0.0.0

admin(system.radius.ldap)>

set filter 123

admin(system.radius.ldap)>

set membership radiusGroupName

admin(system.radius.ldap)>

For information on configuring a Radius LDAP server using the applet (GUI), see

Configuring LDAP Authentication on page 6-67

set

Defines the LDAP parameters.

ipadr

Sets LDAP IP address.

port

Sets LDAP server port.

binddn

Sets LDAP bind distinguished name.

basedn

Sets LDAP base distinguished name.

passwd

Sets LDAP server password.

login

Sets LDAP login attribute.

pass_attr

Sets LDAP password attribute.

groupname

Sets LDAP group name attribute.

filter

Sets LDAP group membership filter.

membership

Sets LDAP group membership attribute.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AP-51 Series

Reviews:

Brands by name

Popular brands

Motorola AP-51 Series, Product Reference Manual

Search results

Summary of Contents for AP-51 Series

Reviews:

Brands by name

Popular brands