manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 251

Configuring Access Point Security

6-13

7.

Select the 

Accounting 

tab as required to define a timeout period and retry interval Syslog 

for MUs interoperating with the access point and EAP authentication server. The items 
within this tab could be enabled or disabled depending on whether Internal or External has 
been selected from the Radius Server drop-down menu.

8.

Select the 

Reauthentication 

tab as required to define authentication connection policies, 

intervals and maximum retries. The items within this tab are identical regardless of whether 
Internal or External is selected from the Radius Server drop-down menu.

External Radius 
Server Address

Specify the IP address of the external Radius server used to provide 
Radius accounting.

External Radius Port

Specify the port on which the Radius server is listening. The default 
port is 1813.

External Radius 
Shared Secret

Specify a shared secret for authentication. The shared secret is 
required to match the shared secret on the Radius server.

MU Timeout

Specify the time (in seconds) for the access point’s retransmission 
of EAP-Request packets. The default is 10 seconds. If this time is 
exceeded, the authentication session is terminated.

Retries

Specify the number of retries for the MU to retransmit a missed 
frame to the Radius server before it times out of the authentication 
session. The default is 2 retries.

Enable Syslog

Select the 

Enable Syslog

 checkbox to enable Radius accounting 

syslog messages relating to EAP events to be written to the 
specified syslog server.

Syslog Server IP 
Address

Enter the IP address of the destination syslog server to be used to 
log EAP events.

Enable 
Reauthentication

Select the 

Enable Reauthentication

 checkbox to configure a 

wireless connection policy so MUs are forced to reauthenticate 
periodically. Periodic repetition of the EAP process provides 
ongoing security for current authorized connections.

Period (30-9999) secs 

Set the EAP reauthentication period to a shorter interval for tighter 
security on the WLAN's connections. Set the EAP reauthentication 
period to a longer time interval (at most, 9999 seconds) to relax 
security on wireless connections. The default interval of 3600 
seconds is recommended.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands