manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 135

System Configuration

4-39

3.

Configure the

 

SNMP Traps

 field to generate traps when SNMP capable MUs are denied 

authentication privileges or are subject of an ACL violation. When a trap is enabled, a trap 
is sent every 5 seconds until the condition no longer exists.

MU associated

Generates a trap when an MU becomes associated with one of the 
access point’s WLANs. 

MU unassociated

Generates a trap when an MU becomes unassociated with (or gets 
dropped from) one of the access point’s WLANs. 

MU denied 
association 

Generates a trap when an MU is denied association to a access 
point WLAN. Can be caused when the maximum number of MUs 
for a WLAN is exceeded or when an MU violates the access point’s 

Access Control List (ACL).

MU denied 
authentication

Generates a trap when an MU is denied authentication on one of 
the AP’s WLANs. Can be caused by the MU being set for the wrong 
authentication type for the WLAN or by an incorrect key or 
password.

SNMP authentication 
failures

Generates a trap when an SNMP-capable client is denied access 
to the access point’s SNMP management functions or data. This 
can result from an incorrect login, or missing/incorrect user 
credentials.

SNMP ACL violation

Generates a trap when an SNMP client cannot access SNMP 
management functions or data due to an Access Control List (ACL) 
violation. This can result from a missing/incorrect IP address 
entered within the 

SNMP Access Control 

screen.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands