manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 113

System Configuration

4-17

select the IKE settings to use either RSA or DES certificates. For additional information on configuring 
VPN tunnels, see 

Configuring VPN Tunnels on page 6-36

.  

Refer to your network administrator to obtain a CA certificate to import into the access point.

To import a CA certificate:

1.

Select 

System Configuration 

-> 

Certificate Mgmt 

-> 

CA Certificates 

from the menu 

tree.

CAUTION

Loaded and signed CA certificates will be lost when changing the 
access point’s firmware version using either the GUI or CLI. After a 
certificate has been successfully loaded, export it to a secure location 
to ensure its availability after a firmware update.

If restoring the access point’s factory default firmware, you must 
export the certificate file BEFORE restoring the access point’s factory 
default configuration. Import the file back after the updated firmware 
is installed. For information on using the access point CLI to import 
and export the access point’s configuration, see 

AP51xx>admin(system.cmgr)> impcert on page 8-170

 and 

AP51xx>admin(system.cmgr)> expcert on page 8-169

.

NOTE

Verify the access point device time is synchronized with an NTP server 
before importing a certificate to avoid issues with conflicting date/time 
stamps. For more information, see 

Configuring Network Time Protocol 

(NTP) on page 4-43

.

!

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands