manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 141

System Configuration

4-45

2.

From within the 

Current Time

 field, click the 

Refresh 

button to update the time since the 

screen was displayed by the user.

The Current Time field displays the current time based on the access point system clock. If 
NTP is disabled or if there are no servers available, the system time displays the access 
point uptime starting at 1970-01-01 00:00:00, with the time and date advancing. 

3.

Select the 

Set Date/Time

 button to display the 

Manual Date/Time Setting

 screen. 

This screen enables the user to manually enter the access point’s system time using a 
Year-Month-Day HH:MM:SS format.

This option is disabled when the Enable NTP checkbox has been selected, and therefore 
should be viewed as a second means to define the access point system time.

4.

If using the Manual Date/Time Setting screen to define the access point’s system time, refer 
to the 

Time Zone

 field to select the time used to use as complimentary information to the 

information entered within the Manual Date/Time Setting screen.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands