manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 54

AP-51xx Access Point Product Reference Guide

2-6

To maximize the access point’s radio coverage area, Motorola recommends conducting a site survey 
to define and document radio interference obstacles before installing the access point.

2.4.1 Site Surveys

A site survey analyzes the installation environment and provides users with recommendations for 
equipment and placement. The optimum placement of 802.11a access points differs from 802.11b/g 
access points, because the locations and number of access points required are different to support 
the radio coverage area.

Motorola recommends conducting a new site survey and developing a new coverage area floor plan 
when switching from 2 or 11Mbps access points (AP-3021 or AP-4131 models) to 54Mbps access 
points (AP-5131 and AP-5181 models), as the device placement requirements are significantly 
different.

2.4.2 Antenna Options

2.4.2.1 AP-5131 Antenna Options

Both Radio 1 and Radio 2 require one antenna and can optimally use two antennae per radio (4 
antennae total for dual-radio models). Two antennae per radio provides diversity that can improve 
performance and signal reception. Motorola supports two antenna suites for the AP-5131. One 
antenna suite supporting the 2.4 GHz band and another antenna suite supporting the 5 GHz band. 
Select an antenna model best suited to the intended operational environment of your AP-5131.

Antenna connectors for Radio 1 are located in a different location from the Radio 2 antenna 
connectors. On single radio versions, the R-SMA connectors can support both bands and should be 
connected to a R-SMA dual-band antenna or an appropriate single band antenna. If necessary a 
R-SMA to R-BNC adapter (Part No. 25-72178-01) can be purchased separately. 

NOTE

On a single-radio AP-5131, Radio 1 can be configured to be either a 2.4 
GHz or 5 GHz radio. On a dual-radio model, Radio 1 refers to the AP-
5131’s 2.4 GHz radio and Radio 2 refers to the AP-5131 5 GHz radio. 
However, there could be some cases where a dual-radio AP-5131 is 
performing a Rogue AP detector function. In this scenario, the AP-5131 is 
receiving in either 2.4 GHz or 5 GHz over the Radio 1 or Radio 2 antennae 
depending on which radio is selected for the scan.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands