manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 279

Configuring Access Point Security

6-41

AH Authentication

AH provides data authentication and anti-replay services for the 
VPN tunnel. Select the required authentication method from the 
drop-down menu: 

•

None

 - Disables AH authentication. The rest of the fields are 

not active. 

•

MD5

 - Enables the Message Digest 5 algorithm requiring 

128-bit (32-character hexadecimal) keys. 

•

SHA1

 - Enables Secure Hash Algorithm 1, requiring 160-bit 

(40-character hexadecimal) keys. 

Inbound AH 
Authentication Key

Configure a key for computing the integrity check on inbound traffic 
with the selected authentication algorithm. The key must be 32/40 
(for MD5/SHA1) hexadecimal (0-9, A-F) characters in length. The 
key value must match the corresponding outbound key on the 
remote security gateway.

Outbound AH 
Authentication Key

Configure a key for computing the integrity check on outbound 
traffic with the selected authentication algorithm. The key must be 
32/40 (for MD5/SHA1) hexadecimal (0-9, A-F) characters in length. 
The key value must match the corresponding inbound key on the 
remote security gateway.

Inbound SPI (Hex) 

Enter an up to six-character hexadecimal value to identify the 
inbound security association created by the AH algorithm. The 
value must match the corresponding outbound SPI value configured 
on the remote security gateway. 

Outbound SPI (Hex)

Provide an up to six-character hexadecimal value to identify the 

outbound security association created by the AH algorithm. The 
value must match the corresponding inbound SPI value configured 
on the remote security gateway.

ESP Type

ESP provides packet encryption, optional data authentication and 
anti-replay services for the VPN tunnel. Use the drop-down menu 
to select the ESP type. Options include:

•

None

 - Disables ESP. The rest of the fields are not be active. 

•

ESP

 - Enables ESP for the tunnel. 

•

ESP with Authentication

 - Enables ESP with authentication. 

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands