Motorola AP-51 Series, Product Reference Manual

Page: 136 / 724

AP-51xx Access Point Product Reference Guide 4-40
4. Configure the Network Traps field to generate traps when the access point’s link status
changes or when the AP’s firewall detects a DOS attack.
5. Configure the System Traps field to generate traps when the access point re-initializes
during transmission, saves its configuration file. When a trap is enabled, a trap is sent every
5 seconds until the condition no longer exists.
Physical port status
change Generates a trap whenever the status changes on the access point.
The physical port status changes when a link is lost between the
access point and a connected device.
DynDNS Update Generates a trap whenever domain name information is updated as
a result of the IP address associated with that domain being
modified.
Denial of service
(DOS) attempts Generates a trap whenever a Denial of Service (DOS) attack is
detected by the access point firewall. A new trap is sent at the
specified interval until the attack has stopped.
Send trap every Defines the interval in seconds the access point uses to generate a
trap until the Denial of Service attack is stopped. Default is 10
seconds.
System Cold Start Generates a trap when the access point re-initializes while
transmitting, possibly altering the SNMP agent's configuration or
protocol entity implementation.
Configuration
Changes Generates a trap whenever changes to the access point’s
configuration file are saved.
Rogue AP Detection Generates a trap if a Rogue AP is detected by the access point.
AP Radar Detection Generates a trap if an AP is detected using a form of radar
detection.
WPA Counter
Measure
Generates a trap if an attack is detected against the WPA Key
Exchange Mechanism.
MU Hotspot Status Generates a trap when a change to the status of MU hotspot
member is detected.
VLAN Generates a trap when a change to a VLAN state is detected.
LAN Monitor Generates a trap when a change to the LAN monitoring state is
detected.