manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 314

AP-51xx Access Point Product Reference Guide

6-76

The Access Policy screen displays the following fields: 

Groups

The 

Groups

 field displays the names of those existing groups that 

can have access intervals applied to them. Click the 

Edit 

button to 

display a screen designed to create access intervals for specific 
days and hours. A mechanism also exists for mapping specific 
WLANs to these intervals. For more information, see 

Editing Group 

Access Permissions on page 6-78

. For information on creating a 

new group, see 

Managing the Local User Database on page 6-72

. 

Time of Access

The 

Time of Access 

field displays the days of the week and the 

hours defined for group access to access point resources. This data 
is defined for the group by selecting the 

Edit 

button from within the 

groups 

field.

Associated WLANs

The 

Associated WLANs

 field displays the WLANs assigned the 

user group access permissions listed within the filters and grid 
fields. Add additional WLANs to a group by selecting the Edit 
button within the groups field.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands