Motorola AP-51 Series, Product Reference Manual

Page: 348 / 724

AP-51xx Access Point Product Reference Guide 7-30
1. Select Status and Statistics -> MU Stats from the access point menu tree.
2. Highlight a specific MU.
3. Select the MU Details button.
4. Refer to the MU Properties field to view MU address information.
5. Refer to the Traffic field to view individual MU RF throughput information.
IP Address Displays the IP address of the MU.
WLAN Association Displays the name of the WLAN the MU is associated with. Use
this information to assess whether the MU is properly grouped
within that specific WLAN.
PSP State Displays the current PSP state of the MU. The PSP Mode field has
two potential settings. PSP indicates the MU is operating in Power
Save Protocol mode. In PSP, the MU runs enough power to check
for beacons and is otherwise inactive. CAM indicates the MU is
continuously aware of all radio traffic. Motorola recommends CAM
for those MUs transmitting with the AP frequently and for periods
of time of two hours.
HW Address Displays the Media Access Control (MAC) address for the MU.
Radio Association Displays the name of the AP MU is currently associated with. If the
name of the
access point
requires modification, see Configuring
System Settings on page 4-2 .
QoS Client Type Displays the data type transmitted by the mobile unit. Possible
types include
Legacy , Voice , WMM Baseline and Power Save .
For more information, see Setting the WLAN Quality of Service
(QoS) Policy on page 5-40 .
Encryption Displays the encryption scheme deployed by the associated MU.
Packets per second The Total column displays average total packets per second
crossing the MU. The Rx column displays the average total packets
per second received on the MU. The Tx column displays the
average total packets per second sent on the MU. The number in
black represents Pkts per second for the last 30 seconds and the
number in blue represents Pkts per second for the last hour.