Motorola AP-51 Series Product Reference Manual Download Page 514

Page: 514 / 724

AP-51xx Access Point Product Reference Guide

8-156

AP51xx>admin(system.access)>set

Description:

Defines the permissions to access the access point applet, CLI, SNMP as well as defining their timeout values.

Syntax:

For information on configuring access point access settings using the applet (GUI), see

Configuring Data Access on page 4-9

set applet

Defines the applet HTTP/HTTPS access parameters.

app-timeout

Sets the applet timeout. Default is 300 Mins.

cli

Defines CLI Telnet access parameters. Enables/disables access from lan
and wan.

ssh

Sets the CLI SSH access parameters.

trusted-host

Enables/Disables global management access (snmp, http, https, telnet and
ssh) for up to 8 addresses (hosts).

auth-timout

Disables the radio interface if no data activity is detected after the interval
defined. Default is 120 seconds.

inactive-timeout

Inactivity interval resulting in the AP terminating its connection.
Default is 120 minutes.

snmp

Sets SNMP access parameters.

admin-auth

Designates a Radius server is used in the authentication verification.

server

<ip>

Specifies the IP address the Remote Dial-In User Service (RADIUS) server.

port

<port#>

Specifies the port on which the RADIUS server is listening. Default is 1812.

secret

<pw>

Defines the shared secret password for RADIUS server authentication.

mode

<mode>

Enables/disables the access point message mode.

msg

Defines the access point login message text.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AP-51 Series

Reviews:

Brands by name

Popular brands

Motorola AP-51 Series, Product Reference Manual

Search results

Summary of Contents for AP-51 Series

Reviews:

Brands by name

Popular brands