manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 110

AP-51xx Access Point Product Reference Guide

4-14

10. Click 

Apply 

to save any changes to the access point Access screen. Navigating away from 

the screen without clicking the Apply button results in all changes to the screen being lost.

11. Click 

Undo Changes 

(if necessary) to undo any changes made. Undo Changes reverts the 

settings displayed on the access point Access screen to the last saved configuration.

12. Click 

Logout 

to securely exit the access point Access Point applet. A prompt displays 

confirming the logout before the applet is closed.

4.3.1 Defining Trusted Hosts

AP-51xx access can be restricted to up 8 specific IP addresses. Trusted Host management restricts 
LAN1, LAN2 and WAN access (via SNMP, HTTP, HTTPS, Telnet and SSH). Only hosts with IP addresses 
matching those defined within the 

Trusted Host Access

 field are able to access the access point. 

Enabling the feature denies access from any subnet (IP address) not defined as trusted. 

To restrict AP access to a set of user defined IP addresses:

1.

Select 

System Configuration

 -> 

AP-51xx Access 

from the menu tree.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands