manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 68

AP-51xx Access Point Product Reference Guide

2-20

2.7.4 Above the Ceiling (Plenum) Installations

An AP-5131 above the ceiling installation requires placing the AP-5131 above a suspended ceiling 
and installing the provided light pipe under the ceiling tile for viewing the rear panel status LEDs of 
the unit. An above the ceiling AP-5131 installation enables installations compliant with drop ceilings, 
suspended ceilings and industry standard tiles from .625 to .75 inches thick. 

The mounting hardware required to install the AP-5131 above a ceiling consists of:

•

Light pipe

•

Badge for light pipe

•

Decal for badge

•

Safety wire (strongly recommended) 

•

Security cable (optional)

To install the AP-5131 above a ceiling:

1.

If possible, remove the adjacent ceiling tile from its frame and place it aside.

2.

Install a safety wire, between 1.5mm (.06in.) and 2.5mm (.10in.) in diameter, in the ceiling 
space.

3.

If required, install and attach a security cable to the AP-5131’s lock port.

4.

Mark a point on the finished side of the tile where the light pipe is to be located.

5.

Create a light pipe path hole in the target position on the ceiling tile.

6.

Use a drill to make a hole in the tile the approximate size of the AP-5131 LED light pipe. 

NOTE

The AP-5131 is Plenum rated to UL2043 and NEC1999 to support above 
the ceiling installations.

CAUTION

Motorola does not recommend mounting the AP-5131 directly to any 
suspended ceiling tile with a thickness less than 12.7mm (0.5in.) or a 
suspended ceiling tile with an unsupported span greater than 660mm 
(26in.). Motorola strongly recommends fitting the AP-5131 with a 
safety wire suitable for supporting the weight of the device. The 
safety wire should be a standard ceiling suspension cable or 
equivalent steel wire between 1.59mm (.062in.) and 2.5mm (.10in.) in 
diameter.

!

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands