manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 207

Network Management

5-49

6.

Click the 

White List Entries

 button (within the 

WhiteList Configuration 

field) to create 

a set of allowed destination IP addresses. These allowed destination IP addresses are called 
a White List. Ten configurable IP addresses are allowed for each WLAN. For more 
information, see 

Defining the Hotspot White List on page 5-50

. 

7.

Refer to the 

Radius Accounting

 field to enable Radius accounting and specify the a 

timeout and retry value for the Radius server.

NOTE

The Enable Hotspot User Timeout option is only available if using the 
access point’s internal Radius Server for user authentication.

NOTE

If using an external Web Server over the WAN port, and the hotspot’s 
HTTP pages (login or welcome) redirect to the access point’s WAN IP 
address for CGI scripts, the IP address of the external Web server and the 
access point’s WAN IP address should be entered in the White List.

Enable Accounting

Select the 

Enable Accounting

 checkbox to enable a Radius 

Accounting Server used for Radius authentication for a target 
hotspot user.

Server Address

Specify an IP address for the external Radius Accounting server 
used to provide Radius accounting for the hotspot. If using this 
option, an internal Radius server cannot be used. The IP address of 
the internal Radius server is fixed at 127.0.0.1 and cannot be used 
for the external Radius server.

Radius Port

Specify the port on which the Radius accounting server is listening.

Shared Secret

Specify a shared secret for accounting authentication for the 
hotspot. The shared secret is required to match the shared secret 
on the external Radius accounting server.

Timeout

Set the timeout value in seconds (1-255) used to timeout users 
accessing the Radius Accounting server if they have not 
successfully accessed the Accounting Server.

Retries

Define the number of retries (1-10) the user is allowed to access 
the Radius Accounting Server if the first attempt fails. The default 
is 1.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands