manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Introducing the Motorola AP-51 Series, an advanced communication solution for seamless connectivity. Unlock the full potential of your device with the comprehensive Product Reference Manual. Easily accessible and free to download from our website, this invaluable manual ensures you make the most of your Motorola AP-51 Series.

Share
Download
background image

xi

Mesh Network Deployment - Quick Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-20

Scenario 1 - Two Base Bridges and One Client Bridge . . . . . . . . . . . . . . . . . .9-20

Configuring AP#1:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-21
Configuring AP#2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-26

Configuring AP#3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-27
Verifying Mesh Network Functionality for Scenario #1. . . . . . . . . . . . . .9-30

Scenario 2 - Two Hop Mesh with a Base and Client Bridge . . . . . . . . . . . . . .9-31

Configuring AP#1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-31
Configuring AP#2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-32

Configuring AP#3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-33
Verifying Mesh Network Functionality for Scenario #2. . . . . . . . . . . . . .9-36

Mesh Networking Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . .9-37

Chapter 10. Adaptive AP

Adaptive AP Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-1

Where to Go From Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2
Adaptive AP Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-3
Types of Adaptive APs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-3
Licensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-4
Switch Discovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-4

Auto Discovery using DHCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-4

Manual Adoption Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-5

Securing a Configuration Channel Between Switch and AP . . . . . . . . . . . . . .10-6
Adaptive AP WLAN Topology  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-6
Configuration Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-6
Securing Data Tunnels between the Switch and AAP  . . . . . . . . . . . . . . . . . .10-6
Adaptive AP Switch Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-7
Remote Site Survivability (RSS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-7
Adaptive Mesh Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-7

Supported Adaptive AP Topologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-9

Topology Deployment Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-9
Extended WLANs Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-10
Independent WLANs Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-10
Extended WLANs with Independent WLANs  . . . . . . . . . . . . . . . . . . . . . . . .10-10
Extended WLAN with Mesh Networking. . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11

How the AP Receives its Adaptive Configuration . . . . . . . . . . . . . . . . . . . . . . . . .10-11

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-51 Series

IDENTEC SOLUTIONS IDS1000 Hardware User Manual preview
IDS1000
Brand: IDENTEC SOLUTIONS Pages: 17
D-Link DIR-868L Technical Support Setup Procedure preview
DIR-868L
Brand: D-Link Pages: 3
D-Link AC1200 Quick Manual preview
AC1200
Brand: D-Link Pages: 2
Inseego 5G MiFi M1100 User Manual preview
5G MiFi M1100
Brand: Inseego Pages: 68
Ubiquiti LiteAP ac LAP-120 Quick Start Manual preview
LiteAP ac LAP-120
Brand: Ubiquiti Pages: 24
Patton SmartNode 5480 Series User Manual preview
SmartNode 5480 Series
Brand: Patton Pages: 58
u-blox NORA-W30 Series System Integration Manual preview
NORA-W30 Series
Brand: u-blox Pages: 52
Logicube Thunderbolt 3/USB-C I/ O CARD Quick Start Manual preview
Thunderbolt 3/USB-C I/ O CARD
Brand: Logicube Pages: 5
Atlantis Land A07-WA6102X-2 Specification Sheet preview
A07-WA6102X-2
Brand: Atlantis Land Pages: 2
Buffalo AisStation WHR-G54S User Manual preview
AisStation WHR-G54S
Brand: Buffalo Pages: 82
KTI Networks KVB-311 User Manual preview
KVB-311
Brand: KTI Networks Pages: 101
Draytek VigorAP 1000C Quick Start Manual preview
VigorAP 1000C
Brand: Draytek Pages: 18
ELTEX WOP-2L User Manual preview
WOP-2L
Brand: ELTEX Pages: 65
Watchguard AP100 Quick Start Manual preview
AP100
Brand: Watchguard Pages: 17
Watchguard AP102 Hardware Manual preview
AP102
Brand: Watchguard Pages: 28
Watchguard AP 327 Series Quick Start Manual preview
AP 327 Series
Brand: Watchguard Pages: 28
Quectel FC908A Hardware Design preview
FC908A
Brand: Quectel Pages: 53
Uniwill B092H0 User Manual preview
B092H0
Brand: Uniwill Pages: 27

Brands by name

Popular brands

Load more brands