manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 307

Configuring Access Point Security

6-69

6.14.3 Configuring a Proxy Radius Server

The access point has the capability to proxy authentication requests to a remote Radius server based 
on the suffix of the user ID (such as myisp.com or company.com). The access point supports up to 10 
proxy servers.  

To configure the proxy Radius server for the access point:

1.

Select 

System Configuration

 -> 

User Authentication 

-> 

RADIUS Server

 -> 

Proxy 

from 

the menu tree.

CAUTION

If using a proxy server for Radius authentication, the 

Data Source 

field within the Radius server screen must be set to 

Local

. If set to 

LDAP, the proxy server will not be successful when performing the 
authentication. To verify the existing settings, see 

Configuring the 

Radius Server on page 6-64

.

CAUTION

When configuring the credentials of an MU, ensure its login (or user) 
name is a 

Fully Qualified Domain Name 

(FQDN), or it cannot be 

authenticated by the access point’s proxy server. For example; 

[email protected]

. 

!

!

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands