manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 315

Configuring Access Point Security

6-77

2.

Review the existing access intervals assigned to each group by selecting the group from 
amongst those displayed. To modify a group’s permissions, see 

Editing Group Access 

Permissions on page 6-78

. 

3.

Click 

Logout 

to securely exit the access point applet. A prompt displays confirming the 

logout before the applet is closed. 

6.14.5.1 Editing Group Access Permissions

The Access Policy screen provides a mechanism for modifying an existing group’s access permissions. 
A group’s permissions can be set for any day of the week and include any hour of the day. Ten unique 
access intervals can be defined for each existing group.

To update a group’s access permissions:

1.

Select 

User Authentication 

-> 

Radius Server

 ->

 Access Policy 

from the menu tree. 

2.

Select an existing group from within the groups field.

3.

Select the 

Edit

 button.

The Edit Access Policy screen displays.

Timeline

Displays a bar graph of the selected group’s access privileges. 
Access times are displayed in a grid format with the the days of the 
week and hours users access is available displayed in green. 
Revise the selected group’s privileges as needed. 

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands