manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 181

Network Management

5-23

3.

Click 

Apply 

to save any changes to the NAT screen. Navigating away from the screen 

without clicking the Apply button results in all changes to the screens being lost.

4.

Click 

Undo Changes

 (if necessary) to undo any changes made. Undo Changes reverts the 

settings displayed on the NAT screen to the last saved configuration.

5.

Click 

Logout

 

to securely exit the Access Point applet. A prompt displays confirming the 

logout before the applet is closed.

5.2.1.1 Configuring Port Forwarding

Use the 

Port Forwarding

 

screen to configure port forwarding parameters for inbound traffic from 

the associated WAN IP address. 

NAT Type

Specify the NAT Type as

 

1 to 1 

to map a WAN IP address to a single 

host (local) IP address. 1 to 1 mapping is useful when users need 
dedicated addresses, and for public-facing servers connected to 
the access point.
Set the NAT Type as 

1 to Many

 to map a WAN IP address to 

multiple local IP addresses. This displays the 

mappings

 button in 

the adjacent Outbound Mappings field. This button displays a 
screen for mapping the LAN IP addresses that are associated with 
each subnet.

Define the NAT Type as 

none

 when routable IP addresses are used 

on the internal network.

Outbound Mappings

When 

1 to 1 

NAT is selected, a single IP address can be entered in 

the 

Outbound Mappings

 

area. This address provides a 1 to 1 

mapping of the WAN IP address to the specified IP address.
When 

1 to Many

 is selected as the NAT Type, the Outbound 

Mappings area displays a

 mappings 

button. Click the button to 

select the LAN1 or LAN2 IP address used to set the outbound IP 
address or select 

none 

to exclude the IP address. 

If 

none

 is selected as the NAT Type, The Outbound Mappings area 

is blank.

Inbound Mappings

When

 

1 to 1

 

or 

1 to Many 

is selected, the 

Inbound Mappings

 

option displays a 

Port Forwarding

 button.

Port Forwarding 

Click the 

Port Forwarding 

button to display a screen of port 

forwarding parameters for inbound traffic from the associated 
WAN IP address. for information on configuring port forwarding, 
see 

Configuring Port Forwarding on page 5-23

.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands