manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Introducing the Motorola AP-51 Series, an advanced communication solution for seamless connectivity. Unlock the full potential of your device with the comprehensive Product Reference Manual. Easily accessible and free to download from our website, this invaluable manual ensures you make the most of your Motorola AP-51 Series.

Share
Download
background image

AP-51xx Access Point Product Reference Guide

IN-8

Q

QoS support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Quality of Service (QoS) . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

R

radio options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
radio, retry histogram . . . . . . . . . . . . . . . . . . . . . . . . . . 7-24
radio, statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18
restore default configuration  . . . . . . . . . . . . . . . . . . . . . 4-5
roaming across routers

TIM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15

rogue AP detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-55
rogue AP detection, allowed APs . . . . . . . . . . . . . . . . . 6-59
rogue AP, details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-61
Routing Information Protocol (RIP) . . . . . . . . . . . . . . . . 1-19

S

secuirty, WPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-21
security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

decryption  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

security, content filtering . . . . . . . . . . . . . . . . . . . . . . . 6-52
security, firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-27
security, KeyGuard  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18
security, rogue AP detection. . . . . . . . . . . . . . . . . . . . . 6-55
security, VPN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-36
security, WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
security, WPA2-CCMP  . . . . . . . . . . . . . . . . . . . . . . . . . 6-24
self certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
serial number  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
service information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
single sku  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
site surveys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
SNMP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13
SNMP Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25
SNMP access control . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29
SNMP settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
SNMP v1/v2  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26
SNMP v1/v2/v3 trap support  . . . . . . . . . . . . . . . . . . . . 1-13
SNMP v3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27
SNMP, access control. . . . . . . . . . . . . . . . . . . . . . . . . . 4-29
SNMP, RF trap thresholds  . . . . . . . . . . . . . . . . . . . . . . 4-37
SNMP, specific traps  . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34
SNMP, traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31
SNMP, v1/v2c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32

SNMP, v3 user definitions  . . . . . . . . . . . . . . . . . . . . . .4-27
statistics, AP-5131  . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-33
statistics, LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-6
statistics, mu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-25
statistics, radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-18
statistics, WAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
statistics, WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-12
suspended T-Bar installations  . . . . . . . . . . . . . . . . . . .2-18
support center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
system

information

general  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

system configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1
system location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
system name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
system settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
system settings, configuration . . . . . . . . . . . . . . . . . . . .4-2
system uptime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4

T

technical support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
testing AP-5131 connectivity  . . . . . . . . . . . . . . . . . . . .3-14
testing connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-14
theory of operations  . . . . . . . . . . . . . . . . . . . . . . . . . . .1-20
TKIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-10
transmit power control . . . . . . . . . . . . . . . . . . . . . . . . .1-15
type filter, configuration . . . . . . . . . . . . . . . . . . . . . . . .5-14

V

VLAN support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12
VLAN, configuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5
VLAN, management tag  . . . . . . . . . . . . . . . . . . . . . . . . .5-8
VLAN, name  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3
VLAN, native tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-8
Voice prioritization  . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14
VPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11
VPN Tunnels  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11
VPN, auto key settings  . . . . . . . . . . . . . . . . . . . . 6-44, 6-45
VPN, configuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-36
VPN, IKE key settings  . . . . . . . . . . . . . . . . . . . . . . . . . .6-47
VPN, manual key settings . . . . . . . . . . . . . . . . . . . . . . .6-40
VPN, status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-50

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-51 Series

Ocens Sidekick Setup Manual preview
Sidekick
Brand: Ocens Pages: 2
Moxa Technologies TAP-213 Quick Installation Manual preview
TAP-213
Brand: Moxa Technologies Pages: 20
Alcatel-Lucent AOS-W 3.4 Quick Start Manual preview
AOS-W 3.4
Brand: Alcatel-Lucent Pages: 7
Z-Com XG-1020 User Manual preview
XG-1020
Brand: Z-Com Pages: 38
TP-Link TL-WR641G User Manual preview
TL-WR641G
Brand: TP-Link Pages: 86
Linksys E2500 V4 Quick Start Manual preview
E2500 V4
Brand: Linksys Pages: 32
VDO MOBILE HOTSPOT Brochure preview
MOBILE HOTSPOT
Brand: VDO Pages: 2
Sony PCWA-AR800 - Wireless Lan Router Troubleshooting Manual preview
PCWA-AR800 - Wireless Lan Router
Brand: Sony Pages: 2
Sony Vaio PCWA-AR800 Operating Instructions preview
Vaio PCWA-AR800
Brand: Sony Pages: 2
Sony PCWA-AR800 Quick Start Manual preview
PCWA-AR800
Brand: Sony Pages: 2
Sony VGP-MR100U - Room Link 2 Specifications preview
VGP-MR100U - Room Link 2
Brand: Sony Pages: 2
Sony CP-AD2 Operating Instructions preview
CP-AD2
Brand: Sony Pages: 2
Sony PCWA-AR300 - VAIO Wireless Router Troubleshooting Manual preview
PCWA-AR300 - VAIO Wireless Router
Brand: Sony Pages: 2
Sony PCSA-WXC1 Operating Instructions preview
PCSA-WXC1
Brand: Sony Pages: 2
Sony VGP-MR100U - Room Link 2 Quick Start Manual preview
VGP-MR100U - Room Link 2
Brand: Sony Pages: 143
Kaba 9200 Quick Manual preview
9200
Brand: Kaba Pages: 2
HPE Aruba AP12-RW Product End-Of-Life Disassembly Instructions preview
Aruba AP12-RW
Brand: HPE Pages: 4
HPE Aruba AP-575 Product End-Of-Life Disassembly Instructions preview
Aruba AP-575
Brand: HPE Pages: 4

Brands by name

Popular brands

Load more brands