Motorola AP-51 Series Product Reference Manual Download Page 373

Page: 373 / 724

8-15

AP51xx>admin(network.lan)> set

Description:

Sets the LAN parameters for the LAN port.

Syntax:

Example:

admin(network.lan)>

set lan 1 enable

admin(network.lan)>

set name 1 engineering

admin(network.lan)>

set ethernet-port-lan 1

admin(network.lan)>

set timeout 45

admin(network.lan)>

set trunking 1 disable

admin(network.lan)>

set auto-negotiation disable

admin(network.lan)>

set speed 100M

admin(network.lan)>

set duplex full

admin(network.lan)>

set dns 1 192.168.0.1

admin(network.lan)>

set dns 2 192.168.0.2

admin(network.lan)>

set wins 1 192.168.0.254

admin(network.lan)>

set trunking disable

admin(network.lan)>

set username phil

admin(network.lan)>

set passwd ea0258c1

set

lan

<mode>

Enables or disables the access point LAN interface.

name

<idx-name >

Defines the LAN name by index.

ethernet-port-lan

<idx>

Defines which LAN (LAN1 or LAN2) is active on the Ethernet port.

timeout

Sets the interval (in seconds) the access point uses to terminate its LAN
interface if no activity is detected for the specified interval.

trunking

<mode>

Enables or disables 802.11q Trunking over the access point LAN port.

auto-negotiation

<mode>

Enables or disables auto-negotiation for the access point LAN port.

speed

<mbps>

Defines the access point LAN port speed as either 10 Mbps or 100 Mbps.

duplex

<mode>

Defines the access port LAN port duplex as either half or full.

username

<name>

Specifies the user name for 802.1x port authentication over the LAN
interface.

passwd

The 0-32 character password for the username for the 802.1x port.

ip-mode

<ip>

Defines the access point LAN port IP mode.

ipadr

<ip>

Sets the IP address used by the LAN port.

mask

<ip>

Defines the IP address used for access point LAN port network mask.

dgw

<ip>

Sets the Gateway IP address used by the LAN port.

domain

<name>

Specifies the domain name used by the access point LAN port.

dns

<ip>

Defines the IP address of the primary and secondary DNS servers used by the
LAN port.

wins

<ip>

Defines the IP address of the WINS server used by the LAN port.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AP-51 Series

Reviews:

Brands by name

Popular brands

Motorola AP-51 Series, Product Reference Manual

Search results

Summary of Contents for AP-51 Series

Reviews:

Brands by name

Popular brands