Motorola AP-51 Series, Product Reference Manual

Page: 410 / 724

AP-51xx Access Point Product Reference Guide 8-52
For information on configuring VPN using the applet (GUI), see Configuring VPN Tunnels on page 6-36 .
salife <name> <lifetime> Defines the name of the tunnnel <name> the
Security Association Life Time <300-65535>
applies to in seconds.
ike opmode <name> <opmode> Sets the Operation Mode of IKE for <name> to
Main or Aggr (essive).
myidtype <name> <idtype> Sets the Local ID type for IKE authentication for
<name> (1 to 13 characters) to <idtype> (
IP , FQDN ,
or UFQDN ).
remidtype <name> <idtype> Sets the Remote ID type for IKE authentication for
<name> (1 to 13 characters) to <idtype> (
IP , FQDN ,
or UFQDN ).
myiddata <name> <idtype> Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required
when the ID type is set to IP.
remiddata <name> <idtype> Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required
when the ID type is set to IP.
authtype <name> <authtype> Sets the IKE Authentication type for <name> to
<authtype> (
PSK or RSA ).
authalgo <name> <authalgo> Sets the IKE Authentication Algorithm for <name>
to
MD5 or SHA1 .
phrase <name> <phrase> Sets the IKE Authentication passphrase for
<name> to <phrase>.
encalgo <name> <encalgo> Sets the IKE Encryption Algorithm for <name> to
<encalgo> (one of
DES , 3DES , AES128 , AES192 ,
or AES256 ).
lifetime <name> <lifetime> Sets the IKE Key life time in seconds for <name> to
<lifetime>.
group <name> <group> Sets the IKE Diffie-Hellman Group for <name> to
either
G768 or G1024 .