manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 30

AP-51xx Access Point Product Reference Guide

1-12

where any wireless device can associate with an AP without authorization. Kerberos requires device 
authentication before access to the wired network is permitted. 

For detailed information on Kerbeors configurations, see 

Configuring Kerberos Authentication on 

page 6-8

.

1.2.8.2 EAP Authentication

The

 Extensible Authentication Protocol (EAP) 

feature provides access points and their associated 

MU’s an additional measure of security for data transmitted over the wireless network. Using EAP, 
authentication between devices is achieved through the exchange and verification of certificates.

EAP is a mutual authentication method whereby both the MU and AP are required to prove their 
identities. Like Kerberos, the user loses device authentication if the server cannot provide proof of 
device identification.

Using EAP, a user requests connection to a WLAN through the access point. The access point then 
requests the identity of the user and transmits that identity to an authentication server. The server 
prompts the AP for proof of identity (supplied to the  by the user) and then transmits the user data 
back to the server to complete the authentication process.

An MU is not able to access the network if not authenticated. When configured for EAP support, the 
access point displays the MU as an EAP station.

EAP is only supported on mobile devices running Windows XP, Windows 2000 (using Service Pack #4) 
and Windows Mobile 2003. Refer to the system administrator for information on configuring a Radius 
Server for EAP (802.1x) support. 

For detailed information on EAP configurations, see 

Configuring 802.1x EAP Authentication on page 

6-11

.

1.2.8.3 WEP Encryption

All WLAN devices face possible information theft. Theft occurs when an unauthorized user 
eavesdrops to obtain information illegally. The absence of a physical connection makes wireless links 
particularly vulnerable to this form of theft. Most forms of WLAN security rely on encryption to 
various extents. Encryption entails scrambling and coding information, typically with mathematical 
formulas called 

algorithms

, before the information is transmitted. An algorithm is a set of instructions 

or formula for scrambling the data. A 

key

 is the specific code used by the algorithm to encrypt or 

decrypt the data. 

Decryption

 is the decoding and unscrambling of received encrypted data.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands