manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 140

AP-51xx Access Point Product Reference Guide

4-44

Time synchronization is recommended for the access point’s network operations. For sites using 
Kerberos authentication, time synchronization is required. Use the 

Date and Time Settings 

screen 

to enable NTP and specify the IP addresses and ports of available NTP servers.  

To manage clock synchronization on the access point: 

1.

Select

 

System Configuration

 - > 

Date/Time

 

from the access point menu tree.

NOTE

The current time is not set accurately when initially connecting to the 
access point. Until a server is defined to provide the access point the 
correct time, or the correct time is manually set, the access point displays 
1970-01-01 00:00:00 as the default time.

CAUTION

If using the Radius time-based authentication feature to authenticate 
access point user permissions, ensure 

UTC

 has been selected from 

the Date and Time Settings screen’s 

Time Zone

 field. If UTC is not 

selected, time based authentication will not work properly. For 
information on configuring Radius time-based authentication, see

Defining User Access Permissions by Group on page 6-76

.

!

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands