manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 165

Network Management

5-7

The VLAN name screen displays. The first time the screen is launched a default VLAN name 
of 1 and a default VLAN ID of 1 display. The VLAN name is auto-generated once the user 
assigns a VLAN ID. However, the user has the option of re-assigning a name to the VLAN 
using 

New VLAN

 and 

Edit VLAN

 screens.

To create a new VLAN, click the 

Add

 button, to edit the properties of an existing VLAN, click 

the 

Edit

 button.

4.

Assign a unique 

VLAN ID 

(from 1 to 4095) to each VLAN added or modified. 

The VLAN ID associates a frame with a specific VLAN and provides the information the 
access point needs to process the frame across the network. Therefore, it may be practical 
to assign a name to a VLAN representative or the area or type of network traffic it 
represents.

A business may have offices in different locations and want to extend an internal LAN 
between the locations. An access point managed infrastructure could provide this 
connectivity, but it requires VLAN numbering be managed carefully to avoid conflicts 
between two VLANs with the same ID.

5.

Define a 32 ASCII character maximum 

VLAN Name

.

Enter a unique name that identifies members of the VLAN. Motorola recommends selecting 
the name carefully, as the VLAN name should signify a group of clients with a common set 
of requirements independent of their physical location. 

6.

Click 

Apply 

to save the changes to the new or modified VLAN.

7.

From the LAN Configuration screen, click the 

WLAN Mapping 

button. The 

Mapping 

Configuration 

screen displays.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands