Motorola AP-51 Series Page 310 Product Reference Manual Download

Page: 310 / 724

AP-51xx Access Point Product Reference Guide

6-72

Refer to the

Groups

field for a list of all groups in the local Radius database. The groups are

listed in the order added. Although groups can be added and deleted, there is no capability
to edit a group name.

Click the

Add

button and enter the name of the group in the new blank field in the Groups

table.

To remove a group, select the group from the table and click the

Del

(Delete) key.

The

Users

table displays the entire list of users. Up to 100 users can be entered here. The

users are listed in the order added. Users can be added and deleted, but there is no
capability to edit the name of a group.

To add a new user, click the

Add

button at the bottom of the Users area.

In the new line, type a

User ID

(username).

Click the

Password

cell. A small window displays. Enter a password for the user and click

to return to the Users screen.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AP-51 Series

Reviews:

Related manuals for AP-51 Series

Brands by name

Popular brands

Motorola AP-51 Series, Product Reference Manual

Search results

Summary of Contents for AP-51 Series

Reviews:

Related manuals for AP-51 Series

Brands by name

Popular brands