manualshive.com logo in svg

Motorola AP-51 Series, Product Reference Manual

Share
Download
Motorola AP-51 Series Product Reference Manual Download Page 631

Configuring Mesh Networking

9-17

the user from selecting the order base bridges are added to the mesh network when one of 
the three associated base bridges becomes unavailable. 

8.

Refer to the 

Available Base Bridge List 

to view devices located by the access point using 

the WLAN selected from the Radio Configuration screen. Refer the following for information 
on located base bridges:

9.

Click 

Refresh

 at any time to update the list of available Base Bridge devices available to the 

access point.

10. Use the 

>> 

button to move a selected base bridge MAC address from Available Base Bridge 

List 

11. Refer to the 

Preferred Base Bridge List 

for a prioritized list of base bridges the mesh 

network’s client bridge uses to extend the mesh network’s coverage area and potentially 
provide redundant links. If a device does not appear on the Available Base Bridge List, there 
is no" way it can be moved to Preferred Base Bridge List as the device has not yet been 
"seen." However, if you know the MAC Address corresponding to that Base Bridge, you can 
add that to the Preferred List using the add button.

NOTE

Auto link selection is based on the RSSI and load. The client bridge will 
select the best available link when the 

Automatic Link Selection 

checkbox is selected. Motorola recommends you do not disable this 
option, as (when enabled) the access point will select the best base 
bridge for connection.

MAC

The MAC field displays the factory set hard-coded MAC address 
that serves as a device identifier.

RSSI

The 

Relative Signal Strength Indicator 

(RSSI) displays the located 

device’s signal strength with the associated access point in client 
bridge mode. Use this information as criteria on whether to move a 
particular device from the available list to the preferred list. 

CHANN

The CHANN displays the name of the channel that both the 
access point and base bridge use. A client bridge can only connect 
to access points (Base Bridges) on the same channel. If the user 
selects multiple base bridges on different channels, the access 
point will only be able to connect to those bridges on the same 
channel and the others will not be able to join this particular mesh 
network.

Summary of Contents for AP-51 Series





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands