Operating Procedures
0112-0127 B
101
Selecting a Plate
If you have created more than one Plate section, and no Plate section is
active, choosing the
Read
command will display a dialog box requiring
you to choose which section to read.
Figure 3-33:
Selecting a Plate Section
Select the correct section and click
OK
. If a Plate section is active, starting
a read will read the active plate.
Replacing Data in a Plate
If you select a Plate section that already contains data and select the
Read command, an alert appears requiring you to confirm that you want
to replace the data with data from the new reading.
Figure 3-34:
Replace Data Warning
Click
Replace
to proceed with the reading and replace any
previous data with the new data.
Click
Cancel
to prevent the reading from starting, preserving
the current data.
FlexStation_manual.book Page 101 Tuesday, June 25, 2013 10:22 AM
