Operating Procedures
0112-0127 B
93
Pipette Tips Layout
The Pipette Tips Layout setting displays the format of tips, 96-well or
384-well, that need to be used for the respective Assay Plate Type that is
chosen.
Figure 3-27:
Pipette Tips Layout Settings
Compound and Tip Columns
The choices for these settings depend upon the number of transfers
chosen in the Compound Transfer window. When one or more transfers
are enabled, these settings allow you to choose the tips and compounds
to be used for transfers.
The settings are either automatically assigned by the software, or you
can manually assign them into any configuration you require.
CAUTION!
Molecular Devices recommends using a full rack of tips each
time you perform a fluid transfer to ensure proper pipetting. If you
mistakenly enable a pipetting function from a tip that is not present, the
instrument can malfunction, potentially causing serious damage.
FlexStation_manual.book Page 93 Tuesday, June 25, 2013 10:22 AM
