Maintenance
0112-0127 B
123
Replacing the Flash Lamp
The flash lamp should be replaced when an error message appears in the
SoftMax Pro Software to indicate replacement is necessary.
Figure 4-6:
Labels Near the Lamp Cover
Figure 4-7:
Flash Lamp Location
WARNING! The following procedures must be completed by a
service-trained user. Do not attempt the following procedures if you
have not been trained properly by appropriate Molecular Devices
personnel.
CAUTION!
To avoid damage to the instrument, follow these instructions
and any instruction labels on the instrument exactly.
FlexStation_manual.book Page 123 Tuesday, June 25, 2013 10:22 AM
