Description
0112-0127 B
43
•
Integrate fluid transfer with Endpoint, Kinetic, and Flex reads.
Transfer fluid during the experiment for fast kinetic
fluorescence, luminescence, and absorbance assays.
Transfer fluid before the beginning of an experiment for
endpoint and kinetic applications.
Define the reagent source and tip columns to be used for
each fluid transfer.
Optimize dispense parameters by specifying the volume,
height, and speed of addition.
Specify the number of strokes used during Trituration to mix
the contents of the source and read plates. Trituration uses
the pipettor to mix the contents of a well by aspirating and
dispensing, for both the source and read plates.
Acquire Data from the Reader
•
Pre-read microplates.
•
Analyze kinetic and spectrum data as it is collected.
•
Save data files for in-depth analysis at a later time.
•
Save multiple microplates with individual template and data
analysis parameters in one or more experiments in a single data
file.
•
Display data on screen.
Raw values, reduced number, or raw values with reduced
number.
Raw microplate data in a microplate format.
Ranged data as integers from 0 to 9 in a microplate format.
Threshold data as being above, below, or between set limits
in a microplate format.
Grayscale data in eight shades of gray corresponding to high
and low limits in a microplate format.
Kinetic or spectrum plots of all microplate wells.
Enlarge the display of individual well plots and overlay
multiple well plots.
FlexStation_manual.book Page 43 Tuesday, June 25, 2013 10:22 AM
