Rev. 1
Page 2-
2
THE PROGRAMS AVAILABLE
GENERAL
The steam sterilizer is appropriate for almost all materials and instruments, so long as they are able to tolerate, without damage, a
minimum
temperature of 121 °C
(otherwise, you will need to use other low-temperature sterilization systems).
The following material can normally be sterilized with steam:
– Stainless steel surgical instruments;
– Carbon steel surgical/generic instruments;
– Rotating and/or vibrating instruments driven by compressed air (turbines) or mechanical transmission (counter-angles, tooth scalers, etc.);
– Glass
articles;
– Mineral-based
articles;
– Articles made of heat-resistant plastic;
– Articles made of heat-resistant rubber;
– Heat-resistant
textiles;
– Medication materials (gauze, pads, etc.);
– Other generic material suitable for autoclave treatment.
e
Depending on the conformation of the material (solid, hollow or porous), any packaging (paper/plastic envelope, sterilization paper,
container, muslin napkin, etc.) and its heat-resistance, it is indispensable that you choose the appropriate program (see
Program
summary table
)
.
The device must not be used for sterilizing fluids, liquids or pharmaceutical products.
Summary of Contents for millennium B
