Mocom millennium B, Service Manual, Page: 5 / 285

Rev.1
Page 1-
4
INTENDED USE
The product described in this manual is exclusively intended for the sterilization of solid and hollow re-usable instruments and porous materials.
THE DEVICE MUST ONLY BE USED BY QUALIFIED PERSONNEL. IT MAY NOT BE USED OR HANDLED BY INEXPERT
AND/OR UNAUTHORIZED PERSONNEL FOR ANY REASON.
This device must not be used for the sterilization of fluids, liquids or pharmaceutical products.
GENERAL WARNINGS
When using this product, always follow the instructions in the manual and never use for anything other than its intended purpose.
T
HE USER IS RESPONSIBLE FOR ALL LEGAL REQUIREMENTS RELATED TO THE INSTALLATION AND USE OF THIS PRODUCT
. T
HE MANUFACTURER
WILL NOT BE RESPONSIBLE FOR ANY BREAKAGE
,
MALFUNCTIONS
,
PROPERTY DAMAGE OR INJURY IN THE EVENT THAT THE PRODUCT IS NOT
INSTALLED OR USED CORRECTLY
.
Please observe the following precautions in order to avoid injury or property damage:
– Use ONLY distilled water of high quality.
The use of water of inadequate quality can severely damage the equipment. See Characteristics of the filling water .
– Do not pour water or other liquids on the equipment;
– Do not pour inflammable substances on the equipment;
– Do not use the equipment in the presence of gas or explosive or inflammable vapors;
– Before performing any maintenance or cleaning, ALWAYS DISCONNECT the electricity.
Whenever it is not possible to disconnect the electricity to the device, or if the external power grid switch is far away or, at any rate, not visible
to the maintainer, place a WORK IN PROGRESS sign on the external power grid switch after turning it OFF.
– Make sure the electrical system is grounded conforming to current laws and/or standards;