Rev.1
Page 1-
20
ACQUISITION AND UPDATING THE AMBIENT PRESSURE VALUES
The sterilizer measures the ambient pressure for the correct operation of several auxiliary devices. Whenever the difference between the value
read and that previously stored (see the Chapter,
“Configuring the Device -
Acquisition the ambient pressure
) is
higher
than a set value,
the system
automatically
updates the stored value after a brief delay. Otherwise, the data remains unchanged without updating.
After updating, the device performs the initial automatic test procedure (see
Initial self test
). At the end, the display shows the following
notice
(accompanied by a beep):
A M B I E N T P R E S S U R E
V A L U E U P D A T E D
- 0 . 0 1 b a r
↵
t o c o n t i n u e
When
↵
is pressed, the device goes to
STAND-BY mode
.
Summary of Contents for millennium B
