Rev. 1
Page 3-
5
Once the door is open, the user is finally asked to
reset
the system:
( A l a r m M e s s a g e )
R E S E T S Y S T E M
9 5 . 5 ° C X X X X
0 . 0 0 b a r 1 1 : 4 3
Perform a
RESET
(described below) and then turn-off the equipment and check the error or make the repair.
e
When the door is opened, the report (normal or extended depending on the type of alarm) will be printed for the interrupted sterilization
program and the alarm that intervened. Check the document, initial it in the space provided and file it in a suitable place. Refer to
report examples
.
Alarm outside the cycle
If the alarm intervenes
outside the sterilization or test program
the display will show:
( A l a r m M e s s a g e )
A L A R M !
8 0 . 5 ° C X X X X
0 . 0 0 b a r
Turn-off the equipment and check the alarm.
Or, depending on the type of alarm:
( A l a r m M e s s a g e )
W A R N I N G !
8 0 . 5 ° C X X X X
0 . 0 0 b a r
Depending on the alarm
Alarm code
Alarm code
Summary of Contents for millennium B
